Phone Charging Ports Damage and Repair
A damaged charging port is one of the most common problems for phones and any other electronic devices. Smartphones usually suffer most because they need to be recharged very often.
The most common causes of phone charging ports damage are:
If your phone gets wet or you keep it in the environment with a high humidity level, the charging port can be damaged by corrosion.
Dust, debris, and dirt will block the contacts and prevent the port from working properly. Unless the piece of debris is big enough to cause serious damage, the problem can be solved by simple cleaning.
- Mechanical damage
This is the most common reason for this kind of issue. It’s impossible to avoid this type of damage because it occurs every time you connect and remove the charging cord. The best thing you can do to prevent this problem is to move very carefully every time you need to charge the phone.
Mechanical damage also occurs if you drop the gadget. In this case, there is no telling the extent and type of the problem without a professional assessment.
As this issue is very common, you may not need to seek the help of a phone charging ports repair service. Here are a few things you can try to fix the problem yourself:
- Remove dust and debris
Take a can of compressed air and try to remove the dirt from the port. You should do this on a regular basis as dust always gets inside and you need to prevent it from accumulating.
- Clean the contacts
Turn off the phone and remove the battery. Take a piece of paper soaked in rubbing alcohol (you can also use a specialized contact cleanser) and gently clean the port from the inside. Be very careful and never spray or pour any liquid cleansers inside the port.
- Fix tension clips
The tension clips on the connector often cause problems as they get depressed too far. You can fix this with the help of a simple sewing needle. Move carefully and raise the clips a little bit. Do your best not to scratch the connector.
If cleaning doesn’t solve the problem, you should get a professional to check the phone. Don’t get too worried as even a seriously damaged charging port can be replaced. In fact, if you feel confident in your abilities, you can try to perform the procedure on your own.
However, if you want to be sure that the problem will be solved quickly and professionally, contact us at http://www.cellspotrepair.com/contact-us.
Common Gaming Console Issues
Gaming consoles bring a great deal of joy into our lives, but they are just machines and therefore are bound to break down at some point. The most common glitches for these devices are:
- Game freezes
- Console turning off (if your PS4 gives you the “blue light of death”, you really need to contact professional Playstation repair service right away)
- Gamepad issues
- No audio or video
- Kinect motion sensor problems (Microsoft Xbox One)
The thing you need to remember if your console breaks down is that any device can be fixed. So you only need to find a reliable gaming console repair service to solve all your problems quickly. In fact, you might not even need to do that as some of the most common glitches you can easily fix yourself.
Simple as it is but a simple reset actually can fix a great number of gaming console issues. The trick here is that you need to give the device a hard reset, which means that you have to power the console down (if possible). Next, disconnect the device from the power supply. Leave the console like this for a few minutes and then power it back again.
- Cool down.
Overheating is one of the biggest issues for electronic gadgets. Gaming for hours on end will definitely make the console hot, and probably too hot, so it’ll start to malfunction. The damage received by the device because of it might be quite serious, so you need to check the temperature of the piece after the glitch occurs. If it is indeed hot, leave it be until it cools down properly.
It’s much more efficient to prevent this kind of damage as fixing gaming consoles can be tricky. Therefore, you need to consider this issue when you install the device. The area you place it in must be well-ventilated and clear of any obstructions that can interfere with the flow of air through the coolers.
- Plug/unplug the cables.
Most of the audio and visual issues with gaming consoles occur because of the connecting cables. They might be switched, disconnected, or broken. So, first you need to check all the ports and make sure that all the cables are securely plugged in the right places. HDMI outlet on your TV is often responsible for the issues, so try using another one if the problem doesn’t go away. If nothing helps, try replacing the cables.
If you’ve tried all of the aforementioned methods, but the problem persists, you should turn to professionals. Contact CellSpot for your Gaming Console Repair if you want your gaming console to be fixed quickly and efficiently.
iPhone Screen Replacement
No matter how attached you are to your iPhone and how careful you are with the device, accidents happen all the time, and one day you might find yourself in the need of the iPhone screen replacement service. Luckily for you, this kind of problem is rather common, so Apple made sure this part of the gadget can be fixed without compromising the device in general.
If you are brave enough, you can try to perform your phone screen replacement on your own. In this case, you will need:
- Tiny star-shaped drivers to undo the screws on the phone.
- A suction pad to lift the screen.
- Plastic picks to make lifting the screen and some other parts easier.
- A replacement screen.
You can either purchase a single screen element or a full screen replacement set. In the former case, you will need to search for all the other aforementioned tools as well as transfer the Home Button on your iPhone when you replace the screen element. If you go for the full set, you’ll get all the necessary tools and the Home Button will be integrated in the new screen. The latter option is definitely more preferable for non-professionals.
iPhone Screen Replacement: a Step-by-Step How to Guide
- Use a tiny star-shaped driver to remove the base screws.
Note, keep the screws safe as they are very small.
- Lift the screen by using the suction pad.
Be very careful and use plastic picks when necessary to assist you in this task. Don’t pull too strongly as you may damage the cables.
- Lift the screen (not more than 90 degrees!) so that you can see a small metal plate that covers connector cables.
- Remove tiny metal screws that hold the plate and put them with the base screws.
- Nudge the plate to the left by one of the plastic picks. Don’t put too much force behind the movement.
- Detach the connector cables by using a flat blade screw or a plastic pick.
Pry them off gently and start from the edge of the connector.
- Reinsert connector cables into your new screen. Use a little bit of force to line them up.
- Replace the metal plate and align the screen properly.
- Power up your iPhone to make sure that everything works.
The Home Button won’t function unless the case is secure, but the rest of the screen should work properly.
- Close the case (start from the top), reinsert base screws and secure the case.
If you are wary about performing this procedure yourself, contact CellSpot Phone Repair and we shall provide you with the screen replacement repair service quickly.
CellSpot Phone Repair – SANTA ANA LOCATION
3318 S. Bristol St.
Santa Ana, CA 92704
CellSpot Phone Repair – TUSTIN LOCATION
1622 Edinger Ave Ste E
Tustin CA 92780
CellSpot Phone Repair – OLATHE KANSAS LOCATION
103 N Parker St
Olathe, KS 66061
What to Do When Your Cell Phone Is Damaged by Water
Cell phone water damage is a serious problem because any form of liquid that comes in direct contact with your phone can affect the electric circuitry and completely destroy the device. However, even when the device seems completely dead, there is still a chance for it to be repaired. A lot of this will depend on your actions after the incident.
DIY for Cell Phone Water Damage
When a situation like this occurs, you should take the device to a professional cell phone water damage repair service as quickly as possible. The more time your phone stays wet, the less is its recovery chance. Water damage is not covered by the warranty of the device, so you shouldn’t waste any time trying to contact the manufacturer.
It is within your power to safely remove a vast amount of water that causes more damage to your phone with every passing minute. So, what to do if your cell phone has water damage?
- Remove the cell phone from the liquid immediately.
- Remove the battery as soon as you take the device out of the water.
- Remove SIM and memory cards.
- Gently dry the cell phone with a soft, absorbent towel.
- Put the parts of the device into a bowl filled with dry rice or silica gel pads. The absorbent material will draw most of the moisture out without damaging the device.
If you cannot take your cellphone to a repair service right away, you should leave it submerged in the absorbent overnight to increase its chances of recovery.
- Wipe the device with rubbing alcohol.
This should help dry it and recover some of the damage if the phone only stayed in the water for a short time.
Cell phone owners often add to the damage by trying to salvage their devices using the wrong methods. The most common mistakes you should avoid are:
- Attempting to dry the phone with heat.
A hairdryer or any heating device will only damage the phone further. In fact, direct heat is to be avoided at all costs in this situation.
- Moving the device incessantly.
When your cell phone gets damaged by water, the less it moves, the better. Put it into a box or a bowl filled with some absorbent material and take it to the repair service like this.
- Turning the phone on.
Even if after you wipe all the water off the device, you shouldn’t turn it on, as some moisture is bound to remain inside and doing this will cause a short circuit. Don’t push any buttons at all to minimize the risk of damage.
Cell Phone Water Damage Repair
If the device spent only a few moments in the water, keeping it submerged in an absorbent of some kind for about 10 hours should solve the problem. However, if it doesn’t work properly after this, you should take it to a professional experienced in cell phone water damage repair.
We at www.cellspotrepair.com possess the skills and tools necessary to resuscitate water damaged cell phones. Our experienced technicians will do everything within their power to repair your device. In case this proves impossible, we shall try our best to salvage the data stored on the damaged gadget.